EC30SXIIV50
- In-Stock
All-Electric SXIII Machine
With the ECSXIII, molders get a machine that delivers fast injection speeds and dry cycle times, ensures longer mold life and provides more uniform clamping force, for greater productivity, flexibility, and versatility, job after job.
Tonnage - Metric (Metric Tons)
Tie Bar Distance (HxV) - Metric (mm) 7
Platen Dimensions (HxV) - Metric (mm)
Injection Capacity (PS) - Metric (g)
Dual Hydraulic Core Pull Program & Electrical Interface
Our machines come equipped with dual core pull programming and interface. Portable hydraulic power units are sold separately, but can be added at any time. Our portable hydraulic units simply plug into the standard interface, for easy, "plug and play" use.
Bushing Free, Grease Free Tie Bars
With bushing-free, grease-free tie bars, there's less chance of contaminating molded parts, increasing your shop's quality.
Linear Guides for Rigid, Precise Machine Movements
On the moving platen, linear guides are used instead of tie bar bushing to ensure steady, precise movement. This friction free drive system is also used on the injection unit to ensure more accurate injection speed and back pressure control. This ensures shot-to-shot repeatability over the life of the machine.
SPI Robot Interface Receptacle
Shibaura ECSXIII machines come equipped with a Euromap 67 (50 pin) robot interface receptacle. Euromap 12 (32 pin) robot interface is also available.
Auto Tonnage Adjustment via Strain Gauge on Tie Bar
This feature utilizes a strain gauge on the tie bar to monitor actual tonnage. Tonnage can be automatically adjusted on-the-fly to ensure accurate tonnage at all times. This prevents over-tonnage as the mold heats up and expands, helping to prevent mold damage and early tool wear.
Auxiliary Equipment Integration Available
The OPC-UA architectures of our V70 controller allows the possibility of integration with ancillary equipment as well as potential data communication with plant ERP and MES systems.
5-point Linkline toggle mechanism - even force distribution, extended mold life, and reduced maintenance
The ECSXIII's 5-point Linkline toggle mechanism is angled to distribute force evenly across the platen, increasing quality and minimizing defects. It has the added benefit of extending mold life and reducing machine maintenance.
Dual Air Blow
Shibaura machines come equipped with dual air blow for help with ejecting difficult parts.
Heater Band Failure Alarm
This feature allow you to quickly identify a failed heater band and replace it quickly. With competitor's machines, first the process suffers as a particular heat zone struggles to maintain temperature. Once someone recognizes that there is likely a failed heater band, they must then test each band within that zone to determine which one is bad.
6 selectable, programmable output signals
Six selectable, programmable output signals
USB Memory Ports
USB Memory Ports
Single Pneumatic Core Pull (timer only) and Single Pneumatic Valve Gate
Single Pneumatic Core Pull, timer only & Single Zone Pneumatic Valve Gate
Advanced Load Cell for Injection
The ECSXIII uses and advanced load cell which ensures accurate control of injection pressure. In combination with the V70 controller, this load cell achieves scientific molding over the balance of the mold without the use of internal transducers.
V50 Controller
15" TFT Color Liquid Display w/Split Screen
User Log-in / Access Control
Easily set permission levels for machine operators, maintenance personnel, production managers, administration and more. By requiring users to log in, you can easily see the changes made to your process, who made the changes, and when the changes were made.
Process Monitoring
Monitor up to 16 processing parameters. You can easily set tolerances around those items and signal an alarm if any of the items move outside of the allowable processing window. Trend charts and SPC/SQC functions are included.
History
The history screen shows the last set-up changes that were made along with alarms, and machine stoppages. This allows you to see what changes were made to the process, by whom, and at what time.
Accessible Machine Ladder Logic
The user has access to the machine ladder logic. This allows the user to see what inputs and outputs are active in real time.
Storage of up to 300 mold recipes
The V50 controller provides storage for up to 300 mold recipes. Notes and pictures can be stored along with the set-up data giving operators more information about the process they are setting up.
Injection Profile Graph
Real time graphic representation of the injection process showing pressure and speed during both injection and holding. This can be set to refresh each shot or to overlay, allowing the operator to easily see variations. This can be especially useful during process set-up.
Production Management
The production management tool allows you to track progress toward completion of the production run. Good parts, reject parts, and total parts are tracked. Separate counters are available to collect part counts by shift, day, and week.
Specifications
0.08 mB
4 year Warranty
Brochure
5.95 mB