TiA250S
- In-Stock
Hydraulic TiA Machine
Tonnage - Metric (Metric Tons)
Tie Bar Distance (HxV) - Metric (mm) 7
Platen Dimensions (HxV) - Metric (mm)
Injection Capacity (PS) - Metric (g)
Injectvisor V50 Controller
Shibaura Machine's V50 controller uses real-time input to report molding conditions and make adjustments as needed, resulting in greater part repeatability and fewer rejects. The 15" touchscreen is intuitive and easy to use, shortening the learning curve while improving accuracy and productivity.
High-Efficiency hydraulic clamp design
This hydraulic clamp design is more than 10% shorter than conventional machines. It utilizes two traversing cylinders for mold opening and closing, while the main cylinder is used for lock-up. It features a high response logic cycle pre-fill valve for faster cycling time and a hydraulic blocking circuit for increased energy savings.
3 micron filtration of hydraulic oil
Hydraulic oil is continuously cycled through three micron filters, increasing oil life while reducing machine malfunctions, maintenance and downtime.
MOLDLYZER - Quality Control System
MOLDLYZER is a patented quality control program that helps ensure part-to-part repeatability for any size production run. MOLDLYZER continuously samples actual hydraulic pressure at different checkpoints during injection, and compares the data to an injection pressure model curve established by the operator for an acceptable part. Data is displayed on the V50 controller, providing the operator with visual indication of molding performance.
Data monitoring of critical molding parameters
Monitoring of cycle, clamp open-to-close, injection fill, and screw recovery times; screw RPM; injection start position; minimum and final cushions. Table and trend views of monitored data along with Statistical Process Control (SPC).
Ladder logic fully accessible through V50 controller
The ladder logic of the machine is fully accessible through the V50 controller. This makes troubleshooting easier and faster thereby reducing machine downtime.
Preventative maintenance reminders
When a schedule preventative maintenance procedure or inspection is due, the alarm button will flash (the machine will not shut down) and the recommended maintenance items will be highlighted in red.
Multi-level access control
An administrator can control who has access to the V50 controller. Depending on the user's job responsibilities, they can access the V50 controller via their own unique log-in. The administrator can set separate permission levels for each user.
Multi-level access control
An administrator can control who has access to the V50 controller. Depending on the user's job responsibilities, they can access the V50 controller via their own unique log-in. The administrator can set separate permission levels for each user.
User Log-in / Access Control
Easily set permission levels for machine operators, maintenance personnel, production managers, administration and more. By requiring users to log in, you can easily see the changes made to your process, who made the changes, and when the changes were made.
Process Monitoring
Monitor up to 16 processing parameters. You can easily set tolerances around those items and signal an alarm if any of the items move outside of the allowable processing window. Trend charts and SPC/SQC functions are included.
History
The history screen shows the last set-up changes that were made along with alarms, and machine stoppages. This allows you to see what changes were made to the process, by whom, and at what time.
Accessible Machine Ladder Logic
The user has access to the machine ladder logic. This allows the user to see what inputs and outputs are active in real time.
Storage of up to 300 mold recipes
The V50 controller provides storage for up to 300 mold recipes. Notes and pictures can be stored along with the set-up data giving operators more information about the process they are setting up.
Injection Profile Graph
Real time graphic representation of the injection process showing pressure and speed during both injection and holding. This can be set to refresh each shot or to overlay, allowing the operator to easily see variations. This can be especially useful during process set-up.